Jump to content

Προβληματακι με Ubuntu


 Share

Recommended Posts

Λοιπον εχω ενα προβληματακι με τα εξης πακετα του Ubuntu.Με το tzdata και το libc6 των οποιων η τελευταια εκδοση μου κανει συνεχεια conflict.Το αποτελεσμα ειναι να μη μπορω να χρησιμοποιησω τα headers που δινει το libc6 και να μην μπορω να εγκαταστησω τιποτα ουτε με make install ουτε με apt-get install.

Δοκιμασα να γυρισω σε παλιοτερη εκδοση τα πακετα και τα ubuntu πηραν το δισακι τους και φυγαν.

:headb:

Ξερει κανεις ενα αντιστοιχο προγραμμα με το speedfan των windose στα ubuntu?Ο ανεμιστηρας σε full ενταση κανει λες και απογειωνεται concord.

:headb: :headb:

Link to comment
Share on other sites

Για αντίστοιχο του speedfan δες εδώ:

http://ubuntuguide.org/wiki/Ubuntu:Feisty#...28lm-sensors.29

 

Για το πρόβλημα που έχεις άνοιξε μια κονσόλα και δώσε:

 

sudo killall apt

sudo killall apt-get

sudo killall aptitude

sudo killall dpkg

sudo dpkg --configure -a

sudo aptitude dist-upgrade -f

 

και μάλλον θα είσαι εντάξει.

Link to comment
Share on other sites

Αυγερινε εισαι αστερι(κυριολεκτικα) :clapping: .Τα headers δουλευουν.Οσο για το lm-sensors παρολο που που το εχω εγκατεστημενο κανω sensors-detect κα δε βρισκει τιποτα μου λεει οτι χρειαζεται ενα eeprom και κυριως το coretemp λογω core2duo.οσο και εαν εψαξα δεν βρηκα αλλο εκτος απο το coretemp.h και δοκιμαζοντας το make -f η to gcc παιρνω μηνυμα missing separator at line 1.Καπου διαβασα οτι μπορει να φταιει και η Mobo μου.

Τα ubuntu αντεπιτιθονται....

Link to comment
Share on other sites

Είναι αρκετά πιθανό να μην υποστηρίζεται ο fan controller της μητρικής σου, αλλά πλην το εξαντλήσουμε ας προσπαθήσουμε τουλάχιστο.

 

Λοιπόν θέλω να δώσεις το output της κονσόλας ακριβώς όπως στο βγάζει (copy paste εδώ) όταν τρέχεις sensors-detect.

Επίσης θέλω ακριβές μοντέλο μητρικής.

Link to comment
Share on other sites

# sensors-detect revision 4348 (2007-03-18 02:45:21 -0700)

 

This program will help you determine which kernel modules you need

to load to use lm_sensors most effectively. It is generally safe

and recommended to accept the default answers to all questions,

unless you know what you're doing.

 

We can start with probing for (PCI) I2C or SMBus adapters.

Do you want to probe now? (YES/no): y

Probing for PCI bus adapters...

Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801H ICH8

 

We will now try to load each adapter module in turn.

Module `i2c-i801' already loaded.

If you have undetectable or unsupported adapters, you can have them

scanned by manually loading the modules before running this script.

 

To continue, we need module `i2c-dev' to be loaded.

Do you want to load `i2c-dev' now? (YES/no): y

Module loaded successfully.

 

We are now going to do the I2C/SMBus adapter probings. Some chips may

be double detected; we choose the one with the highest confidence

value in that case.

If you found that the adapter hung after probing a certain address,

you can specify that address to remain unprobed.

 

Next adapter: SMBus I801 adapter at 0400 (i2c-0)

Do you want to scan it? (YES/no/selectively): y

Client found at address 0x50

Handled by driver `eeprom' (already loaded), chip type `eeprom'

 

Some chips are also accessible through the ISA I/O ports. We have to

write to arbitrary I/O ports to probe them. This is usually safe though.

Yes, you do have ISA I/O ports even if you do not have any ISA slots!

Do you want to scan the ISA I/O ports? (YES/no): y

Probing for `National Semiconductor LM78' at 0x290... No

Probing for `National Semiconductor LM78-J' at 0x290... No

Probing for `National Semiconductor LM79' at 0x290... No

Probing for `Winbond W83781D' at 0x290... No

Probing for `Winbond W83782D' at 0x290... No

Probing for `Silicon Integrated Systems SIS5595'... No

Probing for `VIA VT82C686 Integrated Sensors'... No

Probing for `VIA VT8231 Integrated Sensors'... No

Probing for `IPMI BMC KCS' at 0xca0... No

Probing for `IPMI BMC SMIC' at 0xca8... No

 

Some Super I/O chips may also contain sensors. We have to write to

standard I/O ports to probe them. This is usually safe.

Do you want to scan for Super I/O sensors? (YES/no): y

Probing for Super-I/O at 0x2e/0x2f

Trying family `ITE'... No

Trying family `National Semiconductor'... No

Trying family `SMSC'... No

Trying family `VIA/Winbond/Fintek'... Yes

Found `Winbond W83627DHG Super IO Sensors' Success!

(address 0x290, driver `w83627ehf')

Probing for Super-I/O at 0x4e/0x4f

Trying family `ITE'... No

Trying family `National Semiconductor'... No

Trying family `SMSC'... No

Trying family `VIA/Winbond/Fintek'... No

 

Some CPUs or memory controllers may also contain embedded sensors.

Do you want to scan for them? (YES/no): y

AMD K8 thermal sensors... No

Intel Core family thermal sensor... Success!

(driver `coretemp')

Intel AMB FB-DIMM thermal sensor... No

 

Now follows a summary of the probes I have just done.

Just press ENTER to continue: y

 

Driver `eeprom' (should be inserted):

Detects correctly:

* Bus `SMBus I801 adapter at 0400'

Busdriver `i2c-i801', I2C address 0x50

Chip `eeprom' (confidence: 6)

 

EEPROMs are *NOT* sensors! They are data storage chips commonly

found on memory modules (SPD), in monitors (EDID), or in some

laptops, for example.

 

Driver `w83627ehf' (should be inserted):

Detects correctly:

* ISA bus, address 0x290

Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)

 

Driver `coretemp' (should be inserted):

Detects correctly:

* Chip `Intel Core family thermal sensor' (confidence: 9)

 

I will now generate the commands needed to load the required modules.

Just press ENTER to continue: y

 

To make the sensors modules behave correctly, add these lines to

/etc/modules:

 

#----cut here----

# I2C adapter drivers

i2c-i801

# Chip drivers

eeprom

w83627ehf

# Warning: the required module coretemp is not currently installed

# on your system. For status of 2.6 kernel ports check

# http://www.lm-sensors.org/wiki/Devices. If driver is built

# into the kernel, or unavailable, comment out the following line.

coretemp

#----cut here--

 

mobo---->asus p5b oxi deluxe ktl

Link to comment
Share on other sites

Άρα είσαι οκ. Σου βρήκε τα modules:

 

To make the sensors modules behave correctly, add these lines to

/etc/modules:

 

#----cut here----

# I2C adapter drivers

i2c-i801

# Chip drivers

eeprom

w83627ehf

# Warning: the required module coretemp is not currently installed

# on your system. For status of 2.6 kernel ports check

# http://www.lm-sensors.org/wiki/Devices. If driver is built

# into the kernel, or unavailable, comment out the following line.

#coretemp

#----cut here--

 

Οπότε ανοίγες ως root το /etc/modules και κάνεις copy paste το παραπάνω.

Κάνε και ένα restart μετά να φορτωθούν σωστά τα modules.

Αν δεν σου δουλέψει σημαίνει ότι το module coretemp δεν είναι buildin στον πυρήνα σου και θα πρέπει να βρούμε ένα.

Link to comment
Share on other sites

Δοκιμασα με το me to gedit να το γραψω αλλα δεν ειχε αποτελεσμα μετα απο πολλες προσπαθειες.

 

Αν δεν σου δουλέψει σημαίνει ότι το module coretemp δεν είναι buildin στον πυρήνα σου και θα πρέπει να βρούμε ένα.

Ναι αυτο πιστευω καθως το kernel μου ειναι παλαιοτερo (2.6.16) απο την εκδοση που το εχει buildin (2.6.22 και μετα).Αυτο που δεν καταλαβα ειναι αν θα επρεπε να εγκαταστησω την 64Bit εκδοση των ubuntu η οποια θα εχει πιθανον το συγκεκριμενο kernel η να το παλεψω με την τωρινη μου που ειναι για x86 επεξεργαστες. :wacko:

Αν οχι με την 64bit πως μπορω να αναβαθμισω το τωρινο kernel?Μηπως εχω κανει καμμια γκαφα παλι?

Link to comment
Share on other sites

Ποια έκδοση ubuntu τρέχεις; Η τρέχουσα (Feisty Fawn (7.04)) τρέχει τον 2.6.22.x και στην x86 και στην x8-64 αρχιτεκτονική. Σε Edgy (6.10) είσαι; Δεν κάνεις κανένα upgrade; Σύντομα θα είσαι 2 εκδόσεις πίσω, αφού σε λίγο βγαίνει η Gutsy Gibbon (7.10) και εκεί περιπλέκονται τα πράγματα στο upgrade.

Link to comment
Share on other sites

Λαθος δικο μου, ειχα το 2.6.20-16 kernel οχι το 2.6.16-20(Feisty fawn παντα).Για καλο και για κακο τα ξαναεγκατεστησα με την 64bit εκδοση και ειδα οτι και αυτο ειχε την 2.6.20.Ετσι εκανα update μονος μου στο kernel στην εκδοση 2.6.22-11 η οποια εχει buildin το coretemp.

Με τις οδηγιες του http://ubuntuguide.org/wiki/Ubuntu:Feisty#...28lm-sensors.29

τα εκανα ολα οσα χρειαζοταν και την τελευταια στιγμη οταν πατησα sensors μου εβγαλε

w83627dhg-i2c-9191-290

ERROR: Can't get adapter or algorithm?!?

το οποιο ειναι τουλαχιστον μια βελτιωση καθως παντα μου ελεγε no sensors found :unsure:

μαλλον δε θελει η μητρικη...

Edited by Aiolos
Link to comment
Share on other sites

Ναι έχεις δίκιο, ο kernel στο feisty είναι ο 20-16 όχι ο 22-x. Καλό είναι να μην βάζεις κάτι εκτός package management system γιατί είναι πολύ πιθανό να σου σπάσει η διανομή. Και αν αυτό είναι μια φορά πιθανό με ένα πρόγραμμα, σκέψου πόσες φορές περισσότερο είναι με τον kernel. Δηλαδή kernels, headers, libs κλπ ΠΑΝΤΑ ΚΑΙ ΜΟΝΟ μέσα απ'το Synaptic (ή το Adept ή όποιο frontend του apt χρησιμοποιείς). Το ότι και εδώ έγινε μέσω synaptic δεν λέει κάτι γιατί το repository που του έβαλες για να τραβήξει τον kernel τώρα δεν υπάρχει (το έβγαλες) και δημιουργεί conflict.

 

Θα σου πρότεινα να αναιρέσεις ό,τι βήμα έκανες, να μπουτάρεις δηλαδή με τον παλιό σου kernel και μετά να κάνεις ένα upgrade σε gutsy (που ούτως η άλλως όπου να'ναι βγαίνει και στη φάση που είναι δεν έχει προβλήματα).

 

Δοκίμασε αν μετά το upgrade δεν παίζει, να τρέξεις το lm-sensors ως root.

 

Ορίστε και οι εντολές:

 

sudo update-manager -c -d

 

Αν δεν σου δουλέψει έτσι, τότε κάνε το εξής:

 

sudo sed -e 's/\sfeisty/ gutsy/g' -i /etc/apt/sources.list

sudo apt-get update

sudo apt-get upgrade

Link to comment
Share on other sites

Δυστυχως ουτε και αυτο πετυχε.Ετσι αποφασισα να περιμενω την καινουργια εκδοση που μου ειπες οταν βγει επισημα...Αλλιως θα περασω σε ποιο δραστικα μετρα του στυλ post-670-1189491229.gif

Link to comment
Share on other sites

  • 5 weeks later...

Επιτελους μετα απο την τελευταια αναβαθμιση δουλεψε.... :smilewink: και να το sensors

w83627dhg-isa-0290

Adapter: ISA adapter

VCore: +1.16 V (min = +0.00 V, max = +1.74 V)

in1: +12.20 V (min = +0.11 V, max = +5.44 V) ALARM

AVCC: +3.23 V (min = +1.89 V, max = +0.98 V) ALARM

3VCC: +3.23 V (min = +0.00 V, max = +3.22 V) ALARM

in4: +1.58 V (min = +1.03 V, max = +1.02 V) ALARM

in5: +1.58 V (min = +0.10 V, max = +0.68 V) ALARM

in6: +5.53 V (min = +4.33 V, max = +0.46 V) ALARM

VSB: +3.23 V (min = +0.19 V, max = +1.06 V) ALARM

VBAT: +3.01 V (min = +0.78 V, max = +2.05 V) ALARM

Case Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM

CPU Fan: 2766 RPM (min = 2537 RPM, div = 4)

Aux Fan: 0 RPM (min = 10546 RPM, div = 128) ALARM

fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM

fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM

Sys Temp: +44°C (high = +4°C, hyst = +57°C)

CPU Temp: +49.0°C (high = +80.0°C, hyst = +75.0°C)

AUX Temp: +119.0°C (high = +80.0°C, hyst = +75.0°C) ALARM

 

coretemp-isa-0000

Adapter: ISA adapter

Core 0: +45°C (high = +85°C)

 

coretemp-isa-0001

Adapter: ISA adapter

Core 1: +45°C (high = +85°C)

τωρα πιστευω θα καταφερω να αλλαξω αυτο το καταραμενο 2766rpm που μου σπαει τα νευρα

update:και ναι το εφτιαξα :)

Edited by Aiolos
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...